Name: Vatech PAX-I
Brand: Vatech
Rating: 5 (1 reviews)

To Next Page

PaX-i PACKING GUIDE

STEP 1. Prepare the Device for Packing Remark Check

① In Capture software, press Ctrl + S to bring up Serial

Communication window

Please mark

‘X’ in box

after you

complete each

step.

② Enter ‘pken_0001’ in upper right box and Click ‘SEND’ to

put the unit in Packing Mode

o Once you hear the chime and see [epm_pken_001], the

device is moving into packing mode

o Restart the unit to confirm the unit does not initalize

 A Unit moves into

locking position once

you click ‘SEND’

③ Install the 2 M8x45 locking bolts as shown below to secure

the rotator from moving

 Locking Bolts are

included in the Empty

Box

 This is to prevent

the Rotator from

moving during

transportation.

 If not locked, the

device will be

mechanically

damaged.

 Please turn over to complete

Other manuals for Vatech PAX-I

Questions and Answers:

Need help?

Do you have a question about the Vatech PAX-I and is the answer not in the manual?

General