Vathin DVM-A2 - Patient Information Management; White Balance and Color Calibration; Image Capture and Preview

16
Description of basic function icons
Icon
Name
Function
Reference
section
Basic function
Icon for the basic function interface
3.2.2
File management
Icon for the file management interface.
3.3.3
System setting
Icon for the system setting interface
3.3.4
Photo-shooting
Tap this button or the Vathin endoscope camera button to
take the image and automatically save it in the patient file.
3.2.2.3
Video recording
Tap this button to start recording video. Tap it again to stop
recording and save the recorded video in the patient file.
3.2.2.4
White balance
The white balance adjustment is required before surgery.
3.2.2.2
Patient
information
Tap it to enter the patient information mode.
3.2.2.1
Photo preview
Tap it to preview the latest images.
3.3.2.3
Microphone
Tap this button, and the microphone function will be
disabled; tap it again, and the microphone function will be
enabled again.
/
Audio volume
Tap this button, and the audio function will be disabled; tap it
again, and the audio function will be enabled again.
/
U-disk
Used to indicate the connection status of U-disk. It will not
appear if no U-disk is connected.
/