VDO Cyclecomputing C05 - Mounting the System; Mounting the Handlebar Holder

1
INSTALLATION AND OPERATION MANUAL - VDO CYTEC C 05
Preface
Thank you for buying a VDO CYTEC bicycle computer. The more familiar you get with this model, the more
enjoyable your trips are going to be.
Please read thoroughly all the information provided in this manual. You are getting important and useful hints
for operation to make you fully benefit from all the technical features of your VDO CYTEC bicycle computer.
We wish you enjoyable trips and rides on your bike with VDO CYTEC CYCLE PARTS GMBH
1.Mounting the system
1.1 Mounting the handlebar holder
The handlebar holder fits handlebars of any diameter. Before mounting the system, decide if you will be using
your left or right hand to operate the computer and then mount the handlebar holder on the respective side.
Position the handlebar holder, insert the strap and adjust is by tightening the screw.
GB