VDO Cyclecomputing HC12.6 - Set-Up Modes; Calling Set-Up Modes; Button Functions in Set-Up Mode

2.2 Calling up set-up modes
The MODE 1 key calls up any set-up mode
Calling up the set-up modes requires a 3 sec pressing of the MODE 1 key.
Set-up modes can be entered from various information displays:
You want to set up: Display Information needed
Wheelsize 1 or Wheelsize 2 TRIP DIST
Clock CLOCK
Odometer for Bike 1 ODO 1 METER
Odometer for Bike 2 ODO 2 METER
Navigator, second trip counter NAVIGATOR
Upper and lower limits for pulse STOP WATCH or AVG PULSE or TIME ABOVE or TIME IN or TIME BELOW
2.3 Button / key covering in set-up mode
Once you have entered a set-up mode with MODE 1, the keys have the following (different) functions.
MODE 1 key: jump from digit to digit; exit set-up mode (pressing MODE 1 for 3 sec.)
MODE 2 key: increase/change of digit selected; selecting display symbols
GB
HC
12.6
5