26
SETTING VALUES
SAM Menu
Select scan duration for CD tracks or radio stations
arrows arrows
Scan time
5 to 15 secs
On / Off
Logic
Activate/deactivate ON/OFF Logic function limiting use of the
installation to 1 after removal of ignition key
Activate/deactivate auxiliary source
Activate/deactivate visual temperature warning
Volume of key tones
Choice of key tones for various activities:
Auxiliary
On / Off
Warn LED
On / Off
Chimes lvl
1 to 5
Chimes set
Key press
Confirm
Announce
Warning
Errors
Welcome
Bye-bye
Default
Press Enter
On / Off
Off
Announce 1 / 2
Confirm 1 / 2
Error 1 / 2
Goodbye 1 / 2 / 3 / 4
Telepho 1 / 2 / 3
Warning 1 / 2 / 3
Welcome 1 / 2 / 3 / 4
Buup –3x Buup FAST / SLOW
Beep –3x Beep FAST / SLOW
Beep2 –3x Beep2 FAST / SLOW
Gong–3x Gong FAST / SLOW
Warn –3x Warn FAST / SLOW
Warn2 –3x Warn2 FAST / SLOW
Press Enter
Press Enter
Select volume level for theTraffic Announcement, News bulletins
and Alarm messages
TA Volume
+0 to +8
Select:
> IN if you wish to amplify the received call through the car speakers
> NO if no car phone is connected
> MUTE to automatically interrupt the radio during phone
Phone
In / No / Mute
Select LOW or HIGH according to phone’s mute signal
Phone lvl
Low / High
Increase/Decrease the phone volume
Phone Vol.
-30 to +30
Select:
> IN if you wish to amplify the guidance voice messages through the
car speaker
> NO if no navigation computer connected to the set.
> MUTE to automatically interrupt the radio during the guidance voice
messages
Nav
In / No / Mute
Select LOW or HIGH according to the navigation computer’s
mute signal
Nav lvl
Low / High
Select the SDVC compensation volume level (only when
connected and calibrated, see SDVC).
Level 1 gives a smaller increase while level 5 gives a greater
increase with respect to the car’s speed.
SDVC type
Off / Curve 1 / 2 / 3 / 4 / 5
Launch the installation
Install
To adjust the light display brightness
Brightness
1 to 10
AN2001-2L-Eng.pm7 11/20/02, 3:32 PM26
To Next Page
Loading...
