VDO CD 4203 - Announcements; Traffic and News Announcements

24
ANNOUNCEMENTS
You can reach the Announce Menu by a long
press on the SOURCE key (see cover pages).
Provides an automatically update of all
FM memo stations while the radio is
switched to other sources (e.g. CD / MP3
/ CDC or in mute)
You can automatically update all FM memo
stations while listening other sources.
1- Long press SOURCE.
2- Select RDSMEM DYN with the
keys.
3- Use the keys to set the function: ON
(default value) or OFF.
4- Press ESC to enter the value.
Activating Traffic Announcement
You can activate the TA mode to allow you
listening traffic announcements.
1- Long press SOURCE.
2- Select TRAFFIC with the
keys.
3- Use the keys to set the function: ON
(default value) or OFF.
4- Press ESC to enter the value.
Note : If the radio does not provide TA, the set
will search for a providing transmitter.
Activating the News Bulletin
You can activate the News mode to allow you
listening news bulletins.
1- Long press SOURCE.
2- Select NEWS with the
keys.
3- Use the keys to set the function: ON
(default value) or OFF.
4- Press ESC to enter the value.
Moving to the SAM Menu
Use this function to get to the SAM Menu.
1- Long press SOURCE.
2- Select SAM with the keys.
3- Press ENTER to get to the SAM Menu.
ANIMATIONS
You can reach the Animations Menu by a long
press on DISPLAY key (see cover pages).
Setting the Bargraph*
This function allows you to select the desired
bargraph.
1- Long press DISPLAY
2- Select ANALYSER1 with the
keys.
3- Use the keys to select : OFF, Fill peakH,
Bass Eyes, Magic Eyes, Analog, Propeller or
Peak hold.
4- Press ESC to enter the value.
Selecting a Screen Saver
This function allows you to select an animation
for the screen saver.
1- Long press DISPLAY.
2- Select SCRN SAVER with the
keys.
3- Use the
keys to select a screen saver
animation: OFF, Invador, Comets, Las Vegas,
Star or Rain.
4- Press ESC to enter the value.
Setting the Screen Saver Time
This function allows you to configure the time
for activating the screen saver.
1- Long press DISPLAY.
2- Select TRIGGER with the
keys.
3- Use the keys, to select: 10, 30 or 60 sec.
4- Press ESC to enter the value.
Note : User actions, announcements, tele-
phone mute or loading a disc can interrupt the
screen saver.
Moving to the SAM Menu
Use this function to get to the SAM Menu.
1- Long press DISPLAY.
2- Select SAM with the
keys.
3- Press ENTER to get to the SAM Menu.
* For CD4403 only
AN2001-2L-Eng.pm7 11/20/02, 3:32 PM24