VDO CD 4203 - Car Computer Initialisation; Speed, Distance, and Menu Navigation; Clock, Temperature, and Warning Settings

22
Displaying the speed
Use this function to display the current speed,
the average speed or the maximum speed ever
reached.
1- Short press COMPUTER.
2- Select SPEED with the
keys.
3- Use the
keys to select: CUR (current
speed), AVG (average speed) or MAX
(maximum speed ever reached).
4- Press ESC to enter the value.
Note : You can use this function only when
the speed signal is connected and calibrated
(see SDVC and Calibrating the speed in pages
6 and 10 respectively).
Displaying the distance
1- Short press COMPUTER.
2- Select DISTANCE with the
keys.
3- Use the keys to display the total driven
distance (TOT) or the trip distance (TRIP).
4- Press ESC to quit.
Note : You can use this function only when
the speed signal is connected and calibrated
(see SDVC and Calibrating the speed in pages
6 and 10 respectively).
Moving to the CAR COMPUTER Init
Menu
Use this function to get to the Init Menu.
1- Short press COMPUTER.
2- Select COMP. INIT with the
keys.
3- Press ENTER to get to the Car Computer
Init menu (see next menu).
Moving to the SAM Menu
Use this function to get to SAM Menu.
1- Short press COMPUTER.
2- Select SAM with the keys.
3- Press ENTER to get to the SAM Menu.
CAR COMPUTER INITIALISATION
1- Long press the COMPUTER key to get to
the CAR COMPUTER INIT MENU.
2- Use the
keys to select an option.
3- Use the
keys to set the option value.
4- Press ESC to enter the value.
Setting the hour
Use this function to set the clock hour.
1- Long press COMPUTER.
2- Select SET HOUR with the
keys.
3- Use the keys to set the hour.
4- Press ESC to enter the value.
Note : You can only modify the hour if the
clock is in manual mode
Setting the minute
Use this function to set the clock minute.
1- Long press COMPUTER.
2- Select SET MINUTE with the
keys.
3- Use the keys to set the hour.
4- Press ESC to enter the value.
Note : You can only modify the minutes if the
clock is in manual mode.
Setting the Clock Type
Use this function to set the clock format: 12
hours or 24 hours.
1- Long press COMPUTER.
2- Select CLOCK TYPE with the
keys.
3- Use the
keys to choose 12 H or 24 H
(default value).
4- Press ESC to enter the value.
Selecting Updating Clock Mode
Use this function to manually set the clock or
to automatically update it via RDS.
1- Long press COMPUTER.
2- Select CLOCK MODE the
keys.
3- Use the
keys to choose between RDS
(default value) or Manual.
4- Press ESC to enter the value.
Selecting Temperature Units
Use this function to select the unit for dis-
playing the temperature.
1- Long press COMPUTER.
2- Select TEMP. UNITS with the
keys.
3- Use the
keys to choose the units: C
(Celsius: default value) or F (Fahrenheit).
4- Press ESC to enter the value.
AN2001-2L-Eng.pm7 11/20/02, 3:32 PM22