Naming a Radio Frequency
Use this function to name a radio frequency
with a maximum of 12 letters for each title:
this name will be displayed during playback.
1- Short press ENTER.
2- Select NAME with the keys.
3- Press ENTER to display an alphanumeric
list as typewriter.
4- Scroll through the letters with the
keys and use the keys to get the
upper-case letters, the lower-case letters,
the numbers or the symbols.
5- Press ENTER to display the character, and
repeat this operation for each character.
6- At the end of the word, select [ ].
7- Press ENTER to confirm the name.
Note 11
: The title is attributed when all charac-
ters and spaces are confirmed. If the memory
is full, the NAME function is no longer avai-
lable: you have to delete a name.
Note 22
: To delete a character, select [] at
the beginning of the alphanumeric list and
press ENTER.
Saving a station in memory
You can save up to 30 stations on the FM and
MW wavebands and 10 stations on LW and
SW wavebands.
1- Short press ENTER.
2- Select SAVE IN with the keys.
3- Use the keys to select a memory
number.
4- Press ESC to enter the value.
Note
: It is not possible to manually save sta-
tions from the FM AST or MW AST bands.
Moving to the Tuner Init Menu
Use this function to directly move to the Tuner
Init Menu.
1- Short press ENTER.
2- Select TUNER INIT with the keys.
3- Press ENTER to get the tuner initialisation
menu (see next menu).
Note
: You can have access to this menu by
long pressing the ENTER key.
Moving to the Main Menu
Use this function to get the Main Menu.
1- Short press ENTER.
2- Select SAM with the keys.
3- Press ENTER to get the Main Menu.
TUNER INITIALISA
TION MENU
1- Press the SOURCE key to select TUNER
2- Long press ENTER to get the TUNER INIT
MENU (see options in cover page).
3- Use the keys to select an option.
4- Use the keys to set the option value.
5- Press ESC to enter the value.
Selecting the Scanning Type
On your current waveband and for a scan
time defined, you can select the scanning
type: stations or presets stations.
1- Long press ENTER.
2- Select SCAN TYPE with the keys.
3- Use the keys, to select:
- STATIONS to review all the stations on
the current waveband,
- PRESETS to review all the pre-selected
stations on the current waveband.
4- Press ESC to enter the value.
Note
: You can modify the scan time in the
Main menu.
Searching better Transmitter
With this function, the set can search for local
or distant transmitters for better reception of
the wavebands (in FM only).
1- Long press ENTER.
2- Select SEARCH LVL with the keys.
3- Use the keys to select:
- DISTANT (default value) for more power-
ful distant transmitters,
- LOCAL for lower-powered local stations.
4- Press ESC to enter the value.
Note
: After a while, the function returns to
Distant mode (default value).
12
AN 2001 2L gb.qxd 16/07/01 14:54 Page 12
To Next Page
Loading...
