VDO CD 4402 - Animations; Selecting a Screen Saver; Setting the First Layer; Setting the FM;DAB Switch

23
3- Use the keys to set the function: ON
(default value) or OFF.
4- Press ESC to enter the value.
Note
: You cannot open the TMC if the Traffic
and/or the News are activated.
Activating Traffic Announcement
You can activate the TA mode to allow you
listening traffic announcements.
1- Long press SOURCE.
2- Select TRAFFIC with the keys.
3- Use the keys to set the function: ON
(default value) or OFF.
4- Press ESC to enter the value.
Note
: If the radio does not provide TA, the set
will search for a providing transmitter.
Activating the News Bulletin
You can activate the News mode to allow you
listening news bulletins.
1- Long press SOURCE.
2- Select NEWS with the keys.
3- Use the keys to set the function: ON
(default value) or OFF.
4- Press ESC to enter the value.
Note
: If the radio does not provide News, the
set will search for a providing transmitter.
Setting the FM/DAB Switch*
Use this function to set the switch which
automatically commute the tuner DAB from
FM to DAB and DAB to FM.
1- Long press SOURCE.
2- Select OPTIMIZE with the keys.
3- Use the keys to set the function: ON
(default value) or OFF.
4- Press ESC to enter the value.
Moving to the Main Menu
Use this function to get the Main Menu.
1- Long press SOURCE.
2- Select SAM with the keys.
3- Press ENTER to get the Main Menu.
You can reach the Animations Menu by a long
press on DISPLAY key (see cover pages).
Switching the animations
Use this function to set the animation display.
1- Long press DISPLAY.
2- Select ANIMATIONS with the keys.
3- Use the keys to select ON or OFF.
4- Press ESC to enter the value.
Note
: Setting Off the animation, you deacti-
vate animations non related to the bargraph.
Setting the first Layer
This function allows you to select the desirecd
bargraph of the first layer according to your
equipment type.
1- Long press DISPLAY.
2- Select ANALYSER1 with the keys.
3- Use the keys to choose one represen-
tation: Fill Peak, Peak Hold, Propeller,
Analog, Magic Eyes, Bass Eyes or OFF.
4- Press ESC to enter the value.
Setting the second Layer
This function allows you to select the desirecd
bargraph of the second layer according to
your equipment type.
1- Long press DISPLAY.
2- Select ANALYSER2 with the keys.
3- Use the keys to choose one represen-
tation: bargraph1 to 9, or OFF.
4- Press ESC to enter the value.
Selecting a Screen Saver
This function allows you to select an ani-
mation for the screen saver.
1- Long press DISPLAY.
2- Select SCRN SAVER with the keys.
3- Use the keys to select a screen saver
animation: rain, space invader, Las Vegas
pixel show, piston or comet.
4- Press ESC to enter the value.
English
ANIMATIONS
* Depending on radio reference: see table at the end
AN 2001 2L gb.qxd 16/07/01 14:55 Page 23