16
3- Remove the cassette and close the front.
Note
: In eject error case, the tape is reloaded.
TAPE MENU
1- Press the SOURCE key to select TAPE.
2- Short press ENTER to get the TAPE MENU.
3- Use the keys to select an option.
4- Use the keys to set the option value.
5- Press ESC to enter the value.
Starting the Track Scanning
Track scan allows you to hear the first few
seconds of each track.
1- Press ENTER.
2- Select INTRO SCAN with the keys.
3- Press ENTER to launch the scan: a mes-
sage displays the tracks.
Note
: You can set the number of seconds
sampled (see Main Menu).
Setting Noise Reduction System
The Dolby B NR system can only be activa-
ted if the recorded cassette uses this process.
1- Press ENTER.
2- Select DOLBY NR with the keys.
3- Select ON or OFF with the keys to acti-
vate or deactivate the Dolby system.
4- Press ESC to enter the value.
Note
: The Dolby Noise Reduction system is
manufactured under licence from Dolby
Laboratories Corporation. Dolby and the sym-
bol D are registered trademarks of Dolby
Laboratories Licensing Corporation.
Moving to the Main Menu
Use this function to directly move to the Main
Menu.
1- Short press ENTER.
2- Select SAM with the keys.
3- Press ENTER to get the Main Menu.
You can set the digital radio stations parame-
ters after selecting the DAB source. Then by
either a short or long press on ENTER key, you
get different DAB menus (see cover pages).
The tuner DAB allows you to switch auto-
matically from FM to DAB (station receivable
in DAB) or from DAB to FM (station no more
receivable in DAB).
Note
: Use the Optimize option in the An-
nounce menu to set the FM/DAB switch.
DAB MENU
1- Press the SOURCE key to select the DAB
2- Short press ENTER to get the DAB menu.
3- Use the keys to select an option.
4- Use the keys to set the option value.
5- Press ESC to enter the value.
Selecting a band
With this function, you can select a band in a
scrolling list.
1- Short press ENTER.
2- Select BAND with the keys.
3- Select the stations memorised in the
presets with the keys.
- DAB 123 Manually selected DAB
- DAB Memo DAB band
in alphabetical order
4- Press ESC to enter the value.
Selecting the DAB stations
This function selects the DAB memo band and
sorts all available stations in DAB frequencies
(50 stations max. are memorised).
Following the Learn, first station by alphabe-
tical order is tuned.
1- Short press ENTER.
2- Select LEARN with the keys.
3- Select the stations memorised in the pre-
sets with the keys.
4- Press ESC to enter the value.
DAB* / **
* Depending on radio reference: see table at the end
** For this accessory, see your dealer
AN 2001 2L gb.qxd 16/07/01 14:54 Page 16
To Next Page
Loading...
