VDO CD 4402 - Car Computer Initialisation; Selecting Speed Units; Selecting Updating Clock Mode; Setting the Clock Type

English
21
Moving to the CC Init Menu
Use this function to move to the Init Menu.
1- Short press COMPUTER.
2- Select COMP. INIT with the keys.
3- Press ENTER to get the Car Computer Init
menu (see next menu).
Moving to the Main Menu
Use this function to directly move to the Main
Menu.
1- Short press COMPUTER.
2- Select SAM with the keys.
3- Press ENTER to get the Main Menu.
CAR COMPUTER INITIALISATION
1- Long press the COMPUTER key to get the
CAR COMPUTER INIT MENU.
2- Use the keys to select an option.
3- Use the keys to set the option value.
4- Press ESC to enter the value.
Setting the hour
Use this function to set the clock hour.
1- Long press COMPUTER.
2- Select SET HOUR with the keys.
3- Use the keys to set the hour.
4- Press ESC to enter the value.
Note
: You can only modify the hour if the
clock is in manual mode
Setting the minute
Use this function to set the clock minute.
1- Long press COMPUTER.
2- Select SET MINUTE with the keys.
3- Use the keys to set the hour.
4- Press ESC to enter the value.
Note
: You can only modify the minutes if the
clock is in manual mode.
Setting the Clock Type
Use this function to set the clock format: 12
hours or 24 hours.
1- Long press COMPUTER.
2- Select CLOCK TYPE with the keys.
3- Use the keys to choose 12 H or 24 H
(default value).
4- Press ESC to enter the value.
Selecting Updating Clock Mode
Use this function to manually set the clock or
to automatically update it via RDS.
1- Long press COMPUTER.
2- Select CLOCK MODE the keys.
3- Use the keys to choose between RDS
(default value) or Manual.
4- Press ESC to enter the value.
Selecting Temperature Units
Use this function to select the unit for dis-
playing the temperature.
1- Long press COMPUTER.
2- Select TEMP. UNITS with the keys.
3- Use the keys to choose the units: C
(Celsius: default value) or F (Fahrenheit).
4- Press ESC to enter the value.
Switching the Frost Warning
Use this function to set the frost warning: as
soon as the temperature becomes lower than
3 °C, a warning is generated.
1- Long press COMPUTER.
2- Select FROST WARN with the keys.
3- Select ON or OFF with the keys to acti-
vate/deactivate the function.
4- Press ESC to enter the value.
Note
: You can use this function only if the
temperature sensor is connected.
Selecting Speed Units
Use this function to select the unit for dis-
playing the speed.
1- Long press COMPUTER.
2- Select SPD UNITS with the keys.
3- Use the keys to set the units: Km/h or mph.
4- Press ESC to enter the value.
AN 2001 2L gb.qxd 16/07/01 14:54 Page 21