What to do if Vechline Controller load has a short circuit?
If the short circuit current is 4 times or more than the rated controller load current, the Vechline Controller will automatically cut off the output. If the load reconnects the output automatically five times, it needs to be cleared by pressing the Load button, restarting the controller or switching from Night to Day.
What to do if Vechline Controller load is overloaded?
If the overload current is 1.05 times or more than the rated load current, the Vechline Controller will automatically cut off the output. If the load reconnects automatically five times, it needs to be cleared by pressing the Load button, restarting the controller, or switching from Night to Day.
Why does my Vechline Controller stop working due to overheating?
The Vechline Controller stops working when its temperature exceeds 85 °C and will restart when its temperature is below 75 °C.
What to do about TVS high voltage transients in Vechline Controller?
It is recommended to install an external surge arrester for the Vechline Controller.
General| Brand | Vechline |
|---|---|
| Model | 1206 Series |
| Category | Controller |
| Language | English |
Essential safety guidelines for installation, operation, and maintenance of the MPPT controller.
Introduces the MPPT solar charge controller, its features, and applications.
Details the physical and functional attributes of the MPPT solar charge controller.
Explains the nomenclature used for identifying different Vechline MPPT controller models.
Categorizes controller models based on features, display units, and specifications.
Provides crucial guidance for safe and effective controller installation procedures.
Specifies the necessary configurations and parameters for PV arrays connected to the controller.
Recommends appropriate wire gauges for PV, battery, and load connections for optimal performance.
Details the procedures and clearances required for physically mounting the controller.
Explains the indicators, buttons, and display functions of the XDS2 display unit.
Lists supported battery types (lead-acid, lithium) and their configuration options.
Defines critical voltage parameters for lead-acid and lithium batteries during operation.
Covers PC and APP software settings for controller configuration and monitoring.
Describes various operational modes for the controller's load output, including timer functions.
Details the various built-in protection mechanisms against electrical faults and environmental factors.
Provides solutions for common problems, error indicators, and fault conditions with the controller.
Outlines recommended inspection and preventative maintenance tasks for optimal controller performance.
Displays conversion efficiency curves for the XTRA1206 model under various voltage conditions.
Displays conversion efficiency curves for the XTRA2206 model under various voltage conditions.
Provides detailed dimensional drawings and specifications for the XTRA1206 controller.
Provides detailed dimensional drawings and specifications for the XTRA2206 controller.
To Next Page
