User Manual
Page 17 of 27
C10 Power saving setting
[C10 0] close backlight
[C10 1] close backlight after 1 minute
[C10 2] always backlight
C11 Hold
[C11 0] No Hold function
[C11 1] Peck hold
[C11 2] Data hold
[C11 3] Auto-hold
[C11 4] Animal weighing
C12 Hold time ( if you choose C11=4, you can set the time )
[C12 3] 3 seconds
[C12 5] 5 seconds
C13 Upper limit alarm value
C14 Low limit alarm value
C15 Check inner code
4.4Communicationsetting
C18 Serial interface setting
[C18 0] No sending
[C18 1] Big display
[C18 2] Print format output
[C18 3] Command mode(Z =zero T=tare R=Reply weight
[C18 4] continuous sending
C19 BAUD RATE
[C19 0] 1200bit/s
To Next Page
Loading...