Vector VI 200 - Power on; Zero Setting; Tare; Hold

User Manual
Page 10 of 27
3.2Poweron
Power on and indicator perform self-checking and go to weighing mode.
3.3Zerosetting
Within zero range, press “zero”, indicator weighing is cleared. When
Indicator is not stable, zero is unworkable.
3.4TARE
At the gross weight mode, if the weight is stable, pls. press ”Tare” key , the
indicator will take the loaded weight as tare, and show net weight,
At this time the gross mode will change to net mode. The “ net” and “tare”
light is on, and the net weight is zero
3.5HOLD
C11=0 “hold” function unworkable
C11=1 PEAK HOLD
Press” HOLD” key, the Hold light is on, and show the Maximum data on the