Vector VI 200 - Application Parameter Settings

User Manual
Page 16 of 27
As bellows:
[0080.00]
[CAL 9]
……
[0080.00]
[CALEnd]
count down over, indicator shows loaded weight , loading calibration finish.
If you want to set application parameter. Press
If you want to exit.
Press
C07 Default parameters setting
[C07 0] non-restore default parameters
[C07 1] restore default parameters
Note: after the above parameters setting finish, please do not set default
parameters often, avoid the original setting parameters lost.
4.3Applicationparametersetting
C08 warning tone
[C8 1] open warning tone
[C8 0] close warning tone
C09 Power off automatically
[C9 0] Non-power off
[C9 10] keep still within 10 min. power off automatically
[C9 30] keep still within 30 min. power off automatically
[C9 60] keep still within 60 min. power off automatically