Vector VN5610 - Page 16

2.4 Examples of Usage
Manual VN5610/VN5610A Version 2.0 16
Time stamp clock for
Ethernet and CAN
The VN5610(A) uses a common time stamp clock for Ethernet and CAN events. So if
the measurement setup is extended by a CAN network, the generated CAN time
stamps are always in sync with the Ethernet time stamps which helps analyzing the
network.
ETH CH1
PC
CANalyzer.Ethernet/CANoe.Ethernet
ETH CH2
Sensor
Sensor
Sensor Sensor Sensor
Sensor
CAN
VN5610(A)
bypassing
Time Stamp Clock
USB
CAN
CH3
CAN
CH4
ECUECU
SWITCH
ECU
SWITCH
Figure 7: Extended measuring setup
Note
Additional Vector network interfaces can be synchronized by software or hardware
(see section Time Synchronization on page 43).