Vector VN5610 - Usage Example: Diagnostics over IP

2.4 Examples of Usage
Manual VN5610/VN5610A Version 2.0 18
2.4.4 Diagnostics over IP
DoIP activation line For diagnostics over IP, the VN5610A supports, beside the necessary 100BASE-TX
channel, an digital IO channel which has a DoIP activation line according to the ISO
specification. The activation level can be set by the VN5610A to switch the ECU to
diagnostic mode.
Setup
PC
CANalyzer.Ethernet/CANoe.Ethernet
CAN
ECU
CAN
CH3
CAN
CH4
ETH CH1
VN5610A
Time Stamp Clock
CANoe
ETH SIM
#1
ECU
CANoe
ETH SIM #1
CAN
Gateway
USB
IO
100BASE-TX
DoIP Activation
Figure 9: Simulated nodes
Note
For the diagnostics over IP with the VN5610A CANoe.Ethernet is required.