Vector VN5610 - VN5610 A Connectors and Technical Data

2.6 VN5610A
Manual VN5610/VN5610A Version 2.0 26
2.6 VN5610A
2.6.1 Connectors Ethernet Side
Device connectors
ACT SPEED ACT SPEED
Figure 15: Ethernet CH1, D-SUB9 (100BASE-T1), Ethernet CH2
> Ethernet CH1/CH2 (RJ45)
Standard Ethernet connector for
10BASE-T, 100BASE-TX and
1000BASE-T.
LED ACT
- Illuminates if there is an Ethernet link.
- Blinks if there is Ethernet activity.
LED SPEED
- Off: 10 Mbit
- Orange: 100 Mbit
- Green: 1000 Mbit
> Ethernet CH1/CH2 (D-SUB9)
D-SUB9 connector for 100BASE-T1. Use the BRcable 2Y to access both chan-
nels on separate D-SUB9 connectors (see accessories manual, part number
05103).
Pin Assignment
1 CH2 P
2 CH2 N
3 Not connected
4 CH1 P
5 CH1 N
6 Not connected
7 Not connected
8 Not connected
9 Not connected
5
4
3
2
1
6
7
8
9
N
P
CH1
CH2
Not connected
Not connected
Not connected
Not connected
P
N
Not connected
Reference
The Ethernet configuration can be done in Vector Hardware Config (see section
Device Configuration on page 35).