2.5 VN5610
Manual VN5610/VN5610A Version 2.0 22
> USB
Connect your PC and the VN5610 over USB to install and to use the device with
measurement applications (CANoe, CANalyzer). Use the USB2.0 compliant
cable found in the delivery (USB extension cables may generate faults between
the PC and the device). Connect the device directly to a USB port at your PC or
use a USB hub with its own power supply (self-powered). The device can also be
powered via this connector.
> Host (Ethernet)
Host connector. Reserved for future purposes.
> CAN CH3/4 (D-SUB9)
D-SUB connector with two CAN channels. Use the CANcable 2Y to access both
channels on separate D-SUB9 connectors (see accessories manual, part number
05075).
Pin Assignment
1 CH4 CAN Low
2 CH3 CAN Low
3 CH3 GND
4 Reserved.
Please do not use.
5 Shield
6 CH4 GND
7 CH3 CAN High
8 CH4 CAN High
9 Not connected
To Next Page
Loading...