4-11
A
Operating Your Scooter
Starting
1. Verify that the charge level on the right instrument
cluster is above 4 bars; if less than 4 bars, it is
recommended that you charge your scooter.
2. Place the side stand or center stand, if equipped, in
the up position.
3. Press the power ON/OFF switch to the ON position.
4. Turn the key switch to the ON position. When
in the ON position, the instrument cluster and the
malfunction indicators will illuminate. After a few
moments the malfunction indicators should all
turn off.
WARNING: If any malfunction indicator does not
turn off, contact your authorized dealer. Operating
with malfunction indicators on can cause permanent
damage to your scooter.
5. With the key in the ON position the “READY”
display (A) on the left instrument cluster should
be on.
To Next Page
Loading...
