4-10
3. Plug the charger cord into the AC outlet. The
onboard charger will automatically control the
charging process.
4. As the battery charging continues, the right
instrument cluster will display the level of charge
(A), increasing as charging continues. When
all bars of the display are illuminated, the battery
is fully charged.
A
5. Upon completion of the charge, disconnect the
charger cord from the AC power outlet and store
the cord back into the trunk.
If you have been running your scooter for a long period
of time and the battery is hot, you should wait for it to
cool down before charging. It takes longer to charge
the battery when it is hot. The optimal temperature
of the battery pack is 25°C (77°F). Depending on
conditions, waiting 1 or 2 hours after riding before
charging is sufficient.
1. Open the trunk. See opening the trunk on page 4-5.
2. Remove the cord, routing it through the
designated locations (A) in the trunk edge. The
trunk can now be closed during the charging
process.
A
Charging The Battery
To Next Page
Loading...
