Vectrix VX-1 - Center Stand

4-16
A
Center Stand (optional)
The center stand (A) holds the scooter in an upright
position.
When to use the center stand:
• During a long stop
• When the ground or surface is too unstable for the
side stand
• During servicing
Placing the VX-1 on the center stand:
1. Grasp the left side of the passenger grab handle
with your right hand.
2. Hold the scooter level with your left hand on the 
left handlebar grip.
3. Place your right foot on the lower edge of the
center stand and push downward while guiding the
scooter backward.
To retract the center stand:
1. Straddle scooter.
2. Move scooter forward until center stand folds
upward, back into the chassis.