EasyManua.ls Logo

Vectrix VX-1 - Page 56

Vectrix VX-1
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-14
• Never use the rear brake lever (on the left
handlebar) by itself or with regen braking
without also using the front brake lever (on the right
handlebar). Using only the rear brake may result
in the rear tire sliding, particularly when regen is
used. Be ready to apply both the front and
rear brakes.
Your scooter has the ability to reverse at very low
speeds to assist you with maneuvers such as backing
out of parking spaces. Reverse is only enabled when
the scooter is completely stopped.
The VX-1 will reverse at a slow speed of 3 km/h
(2 mph). To activate reverse from a complete stop,
return the throttle to the neutral position.
By requiring that the throttle returns to neutral before
negotiating reverse, the VX-1 is prevented from going
into reverse immediately after using regen braking to
stop. Release the throttle and the reverse drive ceases.
Stopping
1. With the throttle in the neutral position, press
the power ON/OFF switch to the OFF position. This
switch can also be used in an emergency to shut
off the motor.
2. Turn the key switch to the OFF position and
remove the key. To prevent theft, the key should be
removed anytime the scooter is left unattended.
3. Be sure to charge the battery after each ride. See
Charging The Battery on page 4-10.

Table of Contents

Related product manuals