Vectrix VX-1 - Page 60

4-18
A
Placing the VX-1 on the side stand:
1. Setthescooteronarmsurface.
2. Fold out the side stand (A) with the left foot using the
side stand bar until it snaps into place.
To fold the side stand in:
1. Straddle the scooter.
2. Set the scooter upright.
3. Use your left foot to return side stand upward into
the chassis.
Note: When the side stand is out and the key is in the
“ON” position, the throttle is disabled.