Wiring/Miscellaneous For TLS-IB Consoles W/RS-232 & RS-485 TLS-IB Specifications
5-10
51F Set Euro-Protocol Prefix
545 Set TC Density Enable
601 Set Tank Configuration
604 Set Tank 1 Point Full Height Volume
605 Set Tank 4 point Full and 3/4, 1/2, 1/4 Volumes
606 Set Tank 20 Point Full, 95%, 90%,. . . .Volumes
607 Set Tank Diameter
608 Set Tank Tilt
609 Set Tank Thermal Expansion Coefficient
60A Set Tank Linear Calculated Full Volume
62F Set Mag Probe Float Size
641 Set Density Code
644 Set Probe Density Float Serial Number
645 Set Tank GOST Volume Correction Enable
64C Set Field Density And Temperature
881 Set Communication Port Data
882 Initialize Communication Port Data
883 Set System Measurement Type And Language
902 System Revision Level Report
A01 Probe Type and Serial Number
A02 Probe Factory Dry Calibration Values
A10 Probe Last Sample Buffers
A11 Probe Fast Average Buffers
A12 Probe Standard Average Buffers
Table 5-3. TLS-IB Serial Commands
Command Description
To Next Page
Loading...
Need help?
General
