42 Capacitive electrodes EL 4 … 20 mA - compact
Set-up
1.3.3
1.3.4
6 Write protect None
7 Descriptor
8 Message
9 PV Snsr s/n
Final asmbly num
Revision’s
1.4
like menu 1.3.4
1.2.3.2
as display 4.1
as display 4.2
1.2.3
1.2.3.1
Confirm
safety
enquiry
Indication of sensor
meas. range limits
Indication of sensor
measuring range limits
(1.3.4.5) Date
Individual text
Measured value
Change unit
Info on lower and upper meas.
range limit as well as the min.
span (also sensor
characteristics values)
1.4.1
1.4.2
Adjustment of the integration time
Adjustment of zero and span
Adjustment of zero and span
linear
Level indication in % of the
adjusted span
1.4.3
Menu field with broken line:
Repetition from previous page
}
1.3.3.1
1.3.3.2
Indication of the sensor serial number (as menu window 1.3.4.3)
unknown (Unknown Enumerator)
General
Individual text
None
Empty adjustment with
medium
Full adjustment with
medium
(1.3.4.4) Measurement loop designation as under 1.3.1
(1.3.4.3) Indication of the sensor serial number
}
A1
B1
1.2.3.1
HART
®
-menu plan (continuation)
Generic: Sensor
Range values
1 PV LRV
2 PV URV
3 PV LSL
4 USL
HELP HOME
Generic: Sensor
Device information
1 Distributor
2 Model Generic
3 Dev id
4Tag
5 Date 01/01/97
HELP SAVE HOME
Generic: Sensor
Detailed setup
1 Sensors
2 Signal condition
3 Output condition
4 Device information
SAVE HOME
Generic: Sensor
PV LRV
0.000 mbar
10.000
HELP DEL ESC ENTER
Generic: Sensor
PV URV
100.000 m
90.300
HELP DEL ESC ENTER
Generic: Sensor
Sensors
1PV
2 PV Snsr unit
3 Sensor information
HELP SAVE HOME
Generic: Sensor
Signal condition
1 Snsr Damp 1.000 s
2URV
3 AI LRV
4 Xfer fnctn Linear
5 AI % rnge
HELP SAVE HOME
Generic: Sensor
Output condition
1 Analog output
2 HART output
SAVE HOME
Generic: Sensor
Enter values
1 PV LRV
2URV
3 PV USL
4 PV LSL
HELP SEND HOME
Generic: Sensor
Calibration
1 Apply values
2 Enter values
HELP SAVE HOME
Generic: Sensor
Apply new 20 mA input
ABBR. OK
Generic: Sensor
Apply new 4 mA input
ABORT OK
Generic: Sensor
Set the:
14 mA
2 20 mA
3 Exit
ABORTENTER