Need help?Do you have a question about the Vega VEGAMET 624 and is the answer not in the manual?
Provides information for mounting, connection, setup, maintenance, and fault rectification.
Operations must be done by trained personnel; PPE must be worn.
Instrument is a universal signal conditioner; operational reliability depends on correct use.
Incorrect use can cause hazards like vessel overfill or damage.
High-tech instrument requires strict observance of regulations and guidelines.
Notes Ex-specific safety info for installation/operation in Ex areas.
Safety instructions and cable selection for power supply connection.
Step-by-step guide for electrical connection of the instrument.
Steps for parameter adjustment and initial self-check.
Explains prerequisites and connection via Ethernet for software adjustment.
Describes causes of faults and initial troubleshooting steps.
General| Frequency | 50/60 Hz |
|---|---|
| Category | Test Equipment |
| Device | Vega VEGAMET 624 |
| Measurement Range (Current) | 4 - 20 mA |
| Display | LCD |
| Dimensions | 96 x 96 x 128 mm |
| Weight | Approx. 0.5 kg |
| Measurement Range (Pressure) | 600 bar |
| Output Signal | 4…20 mA, HART |
| Protection Class | IP65 |
| Housing Material | Plastic |
To Next Page
