Vega VEGAMIP R61 - 9 Supplement; Technical Data

9 Supplement
9.1 Technical data
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
- Process fitting - thread 316L
- Process fitting - flange 316L
Antenna Instrument seal Cover or wetted
materials
Threaded version - internal horn antenna
with PTFE cover
FKM (A+P 70.16.-06)
Process seal: Klingersil C-4400
PTFE
316L
Plastic encapsulated antenna with PP cover - PP
Horn antenna/316L FKM (SHS FDM 70C3 GLT)
FFKM (Kalrez 6375)
Process seal: Klingersil C-4400
PTFE
316L
Encapsulated horn antenna with PTFE cover - PTFE
Mounting adapter (option) Graphite Ceramic Al
2
O
3
316L
Materials, non-wetted parts
- Plastic housing plastic PBT (Polyester)
- Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated -
basis: Polyester
- Stainless steel housing - precision cast-
ing
316L
- Stainless steel housing, electropolished 316L
- Seal between housing and housing
cover
NBR (stainless steel housing, precision casting),
silicone (aluminium/plastic housing; stainless steel
housng, electropolished)
- Ground terminal 316L
- Mounting adapter (option) 316L
Sensor length See chapter "Dimensions"
Instrument weight (depending on process
fitting)
0.8 … 4 kg (0.18 … 8.82 lbs)
Process fittings
- Pipe thread, cylindrical (ISO 228 T1) G1½ A
- American pipe thread, tapered 1½ NPT
- Flanges DIN from DN 50, ANSI from 2"
- Mounting adapter G2 A or 2 NPT
36 VEGAMIP R61 • - Transistor
9 Supplement
40694-EN-120228