Vega VEGAPULS C 23 User Manual

23
7 Setup with smartphone/tablet (Bluetooth)
VEGAPULS C 23 • Modbus and Levelmaster protocol
58349-EN-200806
7 Setup with smartphone/tablet (Bluetooth)
7.1 Preparations
Make sure that your smartphone/tablet meets the following system
requirements:
•
Operating system: iOS 8 or newer
•
Operating system: Android 5.1 or newer
•
Bluetooth 4.0 LE or newer
Download the VEGA Tools app from the " Apple App Store", " Goog-
le Play Store" or " Baidu Store" to your smartphone or tablet.
Make sure that the VEGAPULS C 23 is activated, see chapter " Oper-
ating modus, activate device".
7.2 Connecting
Start the adjustment app and select the function " Setup". The smart-
phone/tablet searches automatically for Bluetooth-capable instru-
ments in the area.
The message " Connecting …" is displayed.
The devices found are listed and the search is automatically contin-
ued.
Select the requested instrument in the device list.
Whenestablishingtheconnectionforthersttime,theoperatingtool
andthesensormustauthenticateeachother.Aftertherstcorrect
authentication, each subsequent connection is made without a new
authentication query.
For authentication, enter the 6-digit Bluetooth access code in the
nextmenuwindow.Youcanndthecodeontheoutsideofthedevice
housing and on the information sheet " Pins and Codes" in the device
packaging.
Fig. 19: Enter Bluetooth access code
Note:
If an incorrect code is entered, the code can only be entered again
after a delay time. This time gets longer after each incorrect entry.
The message " Waiting for authentication" is displayed on the smart-
phone/tablet.
System requirements
De
vice activated
Connecting
A
uthenticate
Enter Bluetooth access
code

Vega VEGAPULS C 23 Specifications

General

Brand	Vega
Model	VEGAPULS C 23
Category	Accessories
Language	English