Velleman CS100 User Manual

CS100 GB 14
TROUBLE SHOOTING
====================================================
If your detector is not working as it should, follow these suggestions to see if
you can eliminate the problem.
PROBLEM SUGGESTION
The detector displays or sounds
false signals
You might be sweeping the
detector's search coil too fast or at
the wrong angle. Sweep the search
coil more slowly and hold the
detector correctly. See "Testing and
Using the Detector" and "Pinpointing
a Target".
The detector might sound a false
signal if it detects heavily oxidised
metals. Try pinpointing the target
from several different angles (see
"Pinpointing a Target"). If the
detector does not display and sound
the same signal each time, the target
is probably heavily oxidised metal.
The display does not show the
correct metal type when the detector
There might be more than one target
in the area you are searching.
finds a target. Or the detector sounds
more than one type of tone when it
The target might be a type of metal
that the detector does not recognise.
finds a target. If the target is heavily oxidised, the
detector might not display the correct
metal type. This is not a malfunction.

Velleman CS100 Specifications

General

Brand	Velleman
Model	CS100
Category	Metal Detector
Language	English