VEMAG ROBOT HP7C - Page 91

9. Appendix
9-9
ROBOT HP7C / HP10C / HP15C / HP17C
© VEMAG 2004
9.8 Lubricants
9.8.1 Double screw drive
Type of oil: transmission oil
Oil capacity: approx. 3.2 l
Viscosity class: ISO VG 100 to DIN 51519
Quality: C-LP to DIN 51502
Example: Shell Omala oil 100 (order no. 052.001.017)
9.8.2 Hydraulic drive
Type of oil: hydraulic oil
Oil capacity: approx. 40 l
Viscosity class: ISO VG 46 to DIN 51519
Quality: HLP to DIN 51524
Example: Shell Tellus T46 (order no. 052.001.010)
9.8.3 Vacuum pump
Type of oil: compressor oil
Oil capacity: approx. 0.35 l
Viscosity class: ISO VG 100 to DIN 51519
Quality: VBL to DIN 51506
Example: ARAL Motanol HV 100 (order no. 052.001.025)
9.8.4 Feed unit seals and feed unit drive
Type of grease: high-performance grease which is safe for food use and resistant to
cleaning agents and disinfectants
Example: VEMAG special grease (order no. 052.008.026)
9.8.5 Individual parts
Type of oil: white oil which is safe for food use and resistant to cleaning agents and
disinfectants
Example: VEMAG special oil (order no. 052.008.021)