Venstar T1035 Installation Instructions

Page 4
These tools will be required:
Flat Blade
Screwdriver
Wire cutter
& Stripper
Make sure your Heater/Air Conditioner
is working properly before beginning
installation of the thermostat.
Carefully unpack the thermostat.
Save the screws and instructions.
Turn off the power to the Heating/Air
Conditioning system at the main fuse
panel. Most residential systems have
a separate breaker for disconnecting
power to the furnace.
Proper installation of the thermostat will be
accomplished by following these step
by step instructions. If you are unsure
about any of these steps, call a qualified
technician for assistance.
Preparation
INSTALLATION INSTRUCTIONS
T1035
Su
PM
I2:00
:
Su
PM
I2:00
:
Su
PM
I2:00
:
Su
PM
I2:00
:
Su
PM
I2:00
:

Venstar T1035 Specifications

General

Brand	Venstar
Model	T1035
Category	Thermostat
Language	English