11
www.ventilation-system.com
7. Air ow setting
40
40
70
70
99
99
• Select the AIR FLOW SETTING item from the Engineering menu and
press ENTER
.
• Select the edited speed value (the selected value is highlighted with a
rectangle).
• Use
or buttons to set the air flow value for each fan speed
stage.
• The air flow is set as a percentage of the maximum performance of each
fan.
• To return to the Engineering menu without saving changes press
EXIT
.
8. Temperature sensor
• To select the heating control sensor from the Engineering menu select the
TEMPERATURE SENSOR submenu and press ENTER
.
• Select a desired sensor type.
• Press ENTER
to confirm.
• To return to the Engineering menu without saving changes press
EXIT
.
The duct temperature sensor is installed in the supply air duct downstream
of the heat exchanger.
The room temperature sensor is integrated in the control panel.
9. Language selection
• To select the control panel interface language select the LANGUAGE
submenu from the Engineering menu and press ENTER
.
• Select the desired language from the list.
• Press ENTER
to confirm.
• To return to the Engineering menu without saving changes press
EXIT
.
To Next Page
Loading...
Need help?
General