APRS 51Track X1C3
GPS/Track/DIGI/BT/USB
Remote password
Default password 123456,it must be 6 digits
Be able to remote operate digipeater, control external relays and sensors
When a valid beacon is received and the beacon contains a password and an instruction, the following operations will be
performed.
1, Command A0 closes DIGI 1
2. Command A1 opens DIGI 1
3, Command B0 closes DIGI 2
4. Command B1 opens DIGI 2 5, Command R0 reset
For example: Send custom information through 51TNC, fill in the custom information 123456A0 After sending this
beacon, the repeater DIGI 1 will be closed.
To Next Page
Loading...