APRS 51Track X1C3
GPS/Track/DIGI/BT/USB
Fixed station setting
Lat represents the latitude used by the fixed station, with a fixed length of 7 digits (including the decimal point) and
a degree. Sub-format.
N/S fixed length 1 bit
Lon indicates the longitude used by the fixed station, with a fixed length of 8 digits (including the decimal point)
and degrees. Sub-format.
W/E fixed length 1 bit
Height, in meters, when tracking the aircraft, you must set the height of the station.
After locking, when in fixed station mode,
Various types of fixed station beacons will be sent using this set latitude and longitude
The latitude and longitude of this setting will be used to calculate the relative distance to the other program, the
north position, the relative direction, and so on.
When used to track the
aircraft, you need to set
the local latitude and
longitude, altitude, and
the call sign of the
To Next Page
Loading...