APRS 51Track X1C3
GPS/Track/DIGI/BT/USB
Track function settings
Note: In the Sport site type, no matter which of the following beacon modes is required, the GPS must be effectively
locked before it will be transmitted.
Smart mode:
When the GPS is locked, the beacon is automatically transmitted according to the heading and speed.
Manual mode:
When the GPS is locked, each time the platform's own PTT button is pressed, when it is released, it automatically
follows the beacon.
Timing mode:
When the GPS is locked, the beacon is automatically transmitted at the set time.
Queue mode:
Fired according to the set number of seconds in 1 minute,
Note: Unlike the regular timed transmission, the time base is not the same. The actual transmission time is always
set to +1 second.
For example, if the queue time is 0 seconds, it will be transmitted according to the following
To Next Page
Loading...