APRS 51Track X1C3
GPS/Track/DIGI/BT/USB
Description: Set the path requirements, type, latitude, icon set, longitude, icon, custom information of the beacon
among them:
1 repeater forwarding path
0=No path, no need for other relay forwarding
1=Includes WIDE1-1 (default)
2=Includes WIDE1-1, WIDE2-1
! Indicates the type character, a fixed length of 1 word, generally do not need to be changed. For modifications, refer
to the APRS protocol manual.
3134.55N means latitude, non-fixed length, filled in format, no need to change. Not related to actual launch, used for
factory testing.
/ indicates the icon set, generally do not need to be changed. For modifications, refer to the APRS protocol manual.
12020.66E indicates longitude, non-fixed length, filled in format, no need to change. Not related to actual launch,
used for factory testing.
> Indicates the icon style displayed on the server map, with a fixed length of 1 word, refer to the APRS Icon Set to
change.
X1C represents custom information, up to 50 words in English.
* Voltage, temperature, and air pressure reports are automatically inserted at the end of the message
section. The temperature and pressure sensors are installed to report accordingly.
Firmware upgrade guide: Refer to the 51TNC series upgrade process.
Wuxi Venus Information Technology Co., Ltd
info@ba4tb.qth.com
To Previous Page
Loading...