18
Biometric Reader Holder
Install the Bio Reader Plate and Bio Reader Holder either to the Keyboard or to the base of
the C18 using the following steps.
Keyboard Attachment
Install the Bio Reader Plate and Bio Reader to the Keyboard using the following steps.
1. Attach the Bio Reader Plate to the Bio Reader Holder using two screws.
2. Attach the Bio Reader Plate with Bio Reader Holder to the Keyboard using two
screws.
The Biometric Reader and Holder feature is application dependent
and may not be included with your unit.
Bio Reader
Plate
Bio Reader
Holder
Two
Screws
To Next Page
Loading...
