VERITAS 5250 - Appliance and D Series Shelf Connections

4
Secure the captive screws onto the node ears.
5
Angle in the right side of the bezel so that the upper and lower tabs on the right
side engage with the corresponding holes on the chassis. Rotate the key
counter-clockwise until it stops, which is past the “lock” icon in the 11 o’clock
position.
Understanding appliance and D Series Storage
Shelf connections
You cannot use SAS-2 cables with the storage shelf. You must use the SAS-3
cables that are provided with each storage shelf.
72D Series Appliance installation procedures
Understanding appliance and D Series Storage Shelf connections