EasyManuals Logo

VERITAS Elastica User Manual

VERITAS Elastica
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
16
RECOMMENDED THREAD
Narrow overlock edge
With Three Threads
Rolled edge
With Three Threads
With Two Threads
Thread for needle
Upper looper
Lower looper
Polyester, Nylon, Silk No.50-100
Polyester, Nylon, Silk No.50-100
Bulk nylon (less stretchable)
Nylon No.100
Bulk nylon (less strechable)
NARROW AND ROLLED HEM, PICOT STITCH
Narrow and rolled edge is ideal for use on thin materials such as georgette crepe, crepe de chine, silk
etc.
Also, picot stitch can be produced particularly when sewing on fine 'scarflike' materials.
In view of the nature of these hems, they are unsuitable for use on 'hard' or 'heavy' materials.
1. Raise the presser foot.
2. Open the front cover and working table.
3. Remove the stitch finger from the needle plate by screw driver and keep it in the front cover as
illustrated (Model 320 only) or in the accessory bag.
4. Set the machine according to page 14.
NOTE: 1. Please use following recommended thread for making ideal seams.
2. After finishing , reset the stitch finger in its place. Please ensure inserting it deep as illustrated
in Fig 1.
Cross section
Fig.1
Stitch finger(A)
1
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VERITAS Elastica and is the answer not in the manual?

VERITAS Elastica Specifications

General IconGeneral
Maximum Stitch Width7 mm
DisplayLCD
Start/Stop ButtonYes
Speed ControlYes
Voltage220-240V
Power70W
TypeElectronic
Speed850 stitches/minute
Stitch Optionsdecorative
BobbinTop-loading
Needle ThreaderAutomatic

Related product manuals