1
SPECIFICATION OF MACHINE
Overedge stitch width (Max.)
MODEL
ELASTICA
Number of threads
2, 3 or 4 threads
7mm(left needle)
HA1×SP, HA ×1(130/705H)
1-5mm
Up to 1100 stitches per minute
320 mm(W) ×280mm(D)×320mm(H)
9Kgs
Weight
Dimensions
Stitching speed
Stitch length
Needle
Identification chart………………………………………………………………………….…….2
Accessories……………………………………………………….………………….……………3
Setting up your machine…………………………………………….……………………………4
Preparation for threading……………………………………………………………………...5-6
Lint tray, Cutting width gauge……………………………………………………………......…7
Thread cutter, Changing presser feet……………………………………………………….…7
Changing needle, Needle thread and fabric chart………………………………………......8
Threading your machine…………………………………………………..………...……...9-11
Helpful hints……………………………………………………………………......…………...12
Cutting needle thread…………………………………………………………......…………...12
Testing stitch overlock stitches…………………………………………….....…….………..13
Setting chart………………………………………………………………………......……......14
Three-thread overlock with one needle………………………………………....…………...15
Converting to two-thread use………………………………………………….....…….……..15
Narrow and rolled hem, picot stitch……………………………………………......….……..16
Adjusting thread tensions………………………………………………………......………....17
Adjusting stitch length, Adjusting overedge cutting width, Stitch finger(B)………….....18
Differential feed……………………………………………………………………....……..19-20
Foot pressure regulator………………………………………………………………......…...20
Sewing with extra heavyweight fabric or multiple layers of fabric………………...……..20
Turning outside corners without cutting threads…………………………………..21
Turning curved edges, Removing stitches from sewn fabric……………………..21
Corded overlock………………………………………………………….....…………22
Decorative effects……………………………………………………………………..23
Differential feed applications………………….....………………………………….24
Replacing moving cutter, Disengaging moving cutter…………………………..………....25
Cleaning and oiling………………………………………....………………………….……....26
4. CHECKING PERFORMANCE PROBLEMS……………….………………………........27
TABLE OF CONTENTS
1. KNOWING YOUR MACHINE
2. STARTING TO SEW
Basic techniques
3. CARING FOR YOUR MACHINE
To Next Page
Loading...
Need help?
General
