VERITAS NetBackup 5240 Appliance Product Description

Fiber optic cables require Small Form-factor Pluggable (SFP+) transceivers, which
are provided with each device having Fibre Channel ports. The diagram shows the
SFP, labeled 1, and the fiber optic cable which is attached to it, labeled 2.
Supported SFPs are listed:
■ Finisar
■ JDSU
See “Network cable” on page 49.
Twinaxial copper cables
The NetBackup 5240 Appliance communicates with Ethernet networks that run the
iSCSI protocol through high speed Twinaxial copper cables. If you configure the
appliance to communicate with 10 Gb Ethernet iSCSI networks, these cables
connect to the iSCSI card in the appliance.
These cables are also known as Direct-Access copper cables, and are available
in 1-meter, 3-meter, or 5-meter lengths.
51NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
Twinaxial copper cables

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)