Need help?Do you have a question about the VERITEQ vLog 4.4 and is the answer not in the manual?
General| Version | 4.4 |
|---|---|
| Category | Software |
| Name | VERITEQ vLog |
| Type | Software |
| Functionality | Data analysis |
| Supported Devices | VERITEQ data loggers |
Lists the minimum hardware and software specifications required for installing Veriteq vLog.
Outlines the main steps involved in setting up and using the Veriteq vLog software.
Explains the importance of logger calibration and recommends calibration intervals.
Information on validation protocols provided by Veriteq Instruments for the vLog system.
Detailed instructions for connecting data loggers to a PC via USB, Serial, or Digi/vNet devices.
Guide on the initial setup of the vLog security wizard and logging into the software for the first time.
How to configure audit trail file paths and manage user security levels within vLog.
Instructions on selecting the correct COM port for communication between vLog and data loggers.
Guidance on setting up individual data loggers, including descriptions, sample timing, and channels.
Method for quickly configuring multiple loggers with similar settings using Batch Setup.
Explains the process of copying data from a logger to a PC, creating logger files, and differences between VL and SP loggers.
Step-by-step guide to transferring data from a single data logger using the Transfer Wizard.
Procedure for transferring data from multiple loggers simultaneously using the Batch Transfer Wizard.
Process for adding logger data files (.spl) into a new or existing graph file.
How to view logger file information in a tabular format and customize reports.
Understanding and viewing audit trail reports to track user operations and system changes.
Steps to view and filter audit trail reports by time, user, computer, or event type.
Tips and steps to resolve issues when communicating with data loggers via serial ports.
Explanation of common error messages and their potential causes within the vLog software.
To Next Page