9
Using Your Jetpack for the First Time
System Requirements
Your computer, tablet, or other wireless devices need Wi-Fi capability and Internet browser
software only. Your Jetpack is compatible with most major operating systems and the latest
versions of browsers.
Installing the 4G LTE SIM Card
Your SIM (Subscriber Identity Module) card is a small rectangular plastic card that stores your
phone number and important information about your wireless service.
If not already inserted, follow the instructions below to install your 4G LTE SIM card.
1. Remove the back cover of your device and take the battery out.
2. Lift the “LIFT” tab and slide your SIM card in the SIM card slot with Verizon logo facing up.
After installation, secure the “LIFT” tab back into place.
3. Properly install the battery and put the back cover on.
IMPORTANT! Do not bend or scratch your SIM card. Avoid exposing your SIM card to static
electricity, water, or dirt. Whenever you insert or remove the SIM card, ensure your Jetpack is
powered off and is not connected to any power source. Never use tools, knives, keys, or any
type of object to force the door open or to remove the SIM card.
Removing the 4G LTE SIM Card
To remove the 4G LTE SIM card, follow the instructions below.
1. Remove the back cover and take out the battery.
2. Lift the “LIFT” tab and pull the SIM card out.
3. Secure the “LIFT” tab into place, place the battery, and put the back cover on.
To Next Page
Loading...
Need help?
General
