Vertex Standard EVX-539 - Page 28

EVX-539 OpErating Manual26
Id cHEcK
This function allows logged ID of the DTMF Signal-
ing and 5-tone Signaling to be reviewed and relayed
(5-tone Signaling only) to a specic station:

Press, (or press and hold), the assigned
PF
key to
display the logged ID of the DTMF Signaling and
5-tone Signaling.

Press the
[
A
]
key to select the category (“DTMF
Signaling” or “5-tone Signaling”) to be reviewed,
then press the
SIDE-1
/
SIDE-2
buttons to select
the ID.

Press the
[
B
]
key to toggle the display between
the “ID code display” and “Tag display”.

Press the
[
C
]
key to send the Call back, when
recalling the ID of the “5-tone Signaling”, if de-
sired.
You may cancel the Call back sending by press-
ing the
[
C
]
key. In this case, the display indicates
“- CANCEL -” briey.
arts logIn
This function enable the displaying the logged ID of
the MDC1200
®
ARTS™ (or ARTSII™).

Press, (or press and hold), the assigned
PF
key
to display the number of the logged station of
the MDC1200
®
ARTS™ (or ARTSII™) for ve
seconds, and then the display indicates the “ID
number” of the logged station.

Press the
SIDE-1
/
SIDE-2
buttons to indicate the
“ID number” of other stations, if needed.

Press the
[
C
]
key to resume normal display.
advancEd opEratIon
FCC ID: AXI11154620
IC: 10239A-11154620