Vertex Standard EVX-S24 User Manual

EVX-S24 OPERATING MANUAL 37

Press and hold in the
[
SIDE
]
key to confi rm the “Call
ID” of the selected message.

If you want to delete the selected message:

Press and hold in the
[
SIDE
]
key again to indicate
the “Delete” selection.

Press the
[

]
/
[

]
keys to select the “Yes”, then
press the
[
MODE
(
)]
key.

You may cancel the deleting the message by select-
ing the “No” instead “Yes ” in the above step.
ALL Delete: You may delete the all text messages at once.

Press the
[

]
/
[

]
keys to select the “ALL Delete”
selection which is located at the last message loop.

Press the
[

]
/
[

]
keys to select the “Yes ”, then press
the
[
MODE
(
)]
key.

You may cancel the deleting the all text messages by
selecting the “No” instead “Yes ” in the above step.
“SEL MSG” function
In this function, you may send the text message to other
radio.

Press the
[

]
/
[

]
keys to select “SEL MSG”, then
press the
[
MODE
(
)]
key to accept it.

Press the
[

]
/
[

]
keys to select the message you wish
to send.

Press the
[
MODE
(
)]
key, “SEND” notation will
appear.

Press the
[
MODE
(
)]
key, then press the
[

]
/
[

]
keys to select the Contact Alias.

Press the
[
MODE
(
)]
key again to send the mes-
sage.
ANALOG MODE
Message feature on the “Analog” mode, you may send
the 5-Tone status text of the pre-programmed encoder list,
and confi rm the “Message” corresponding to that received
5-Tone status text.
Sending the Message

Press the
[

]
/
[

]
keys to select “SELECT”.

Press the
[
MODE
(
)]
key, then press the
[

]
/
[

]
keys to select the “Message” you wish to send.

Press the
PTT
key to send the message.
Confi rm the Message

Press the
[

]
/
[

]
keys to select “CHECK”.

Press the
[
MODE
(
)]
key to appear the received
“Message”.
USER SET
(
MENU
)
M
ODE

Vertex Standard EVX-S24 Specifications

General

Brand	Vertex Standard
Model	EVX-S24
Category	Two-Way Radio
Language	English