Vertex Standard VX-1700 Series User Manual

48 VX-1700 Series (EXP Version) Service Manual
Programming Example 1
Selcall Feature Basic Setup
1. Assign the “SELCALL” function into the “Pro-
grammable Function key 1 (P1 SET)” and the
“CALL” function to the “Programmable Function
key 2 (P2 SET)” from the “KEY FUNCTION” pa-
rameter in the “Common” menu.
2. Set the “SELCALL” parameter in the “Selcall”
menu to the “TX+RX” option, to enable the re-
ceiving and sending of a Selcall.
3. Enter the your radio’s Selcall ID (four digits) into
the “Selcall Self ID” column on the “Main Pro-
gramming Screen (Memory Screen)” for each
memory channel.
4. Enter the station’s Selcall ID (four digits) of the
station to be called into the “TXID” parameter in
the “Selcall” menu.
5. Set the effective channel range (i.e.1-001 and 1-
200) for the TX ID into the “FROM“ and
“TO“columns of the “TX ID” parameter in the
“Selcall” menu.
6. Download the programming data to the transceiv-
er from the computer via the “Download” param-
eter in the “Radio” menu.




CE77 PC Programming Software

Vertex Standard VX-1700 Series Specifications

General

Brand	Vertex Standard
Model	VX-1700 Series
Category	Radio
Language	English