Vertex Standard VX-2200 Series User Manual

VX-2200
(
LTR
)
SeRieS OpeRaTing ManuaL
23
advanced OperatiOn
eMerGency
The
VX-2200
(
LTR
)
series include an “Emergency” feature which may be use-
ful if you have someone monitoring on the same frequency as your transceiver’s
channel.
Press (or press and hold) the assigned
PF
key to initiate an emergency call. For
further details contact your Vertex Standard dealer.
cAll 1/2
Press (or press and hold) the assigned
PF
key to send a 5-Tone sequential burst
which is pre-dened.
code uP/down
Press (or press and hold) the assigned
PF
key to select a 5-Tone encode code from
pre-dened encode list.
cAll/reset
When this feature is programmed and a selective call has been received, press the
assigned
PF
key to reset the ashing indicator and mute the receiver; otherwise
press the assigned
PF
key to sent your radio’s identication code (ANI) to the dis-
patcher.
Phone
Press (or press and hold) the assigned
PF
key to dial the Dealer pre-programmed
Auto-Dial telephone number. The DTMF tones sent during the dialing sequence
will be heard in the speaker.
Public Address
Press (or press and hold) the assigned
PF
key to use the transceiver as a PA ampli-
er. When you enable this function, a tone sounds and “
PA
” notation will appear
on the display. The public address can be used even while scanning and receiving
a call.
eXt. Acc1
During pressing and holding the assigned
PF
key, activates the optional device. It
works as a momentarily action.
eXt. Acc2
Press (or press and hold) the assigned
PF
key to toggle the optional device “on”
and “off.”

Vertex Standard VX-2200 Series Specifications

General

Brand	Vertex Standard
Model	VX-2200 Series
Category	Transceiver
Language	English