VX-2200
(
LTR
)
25
advanced OperatiOn
ARTS (Auto Range Transpond System)
This system is designed to inform you when you and another ARTS-equipped sta-
tion are within communication range.
During ARTS operation, when the radio receives an incoming ARTS signal, a
short beep will sound, and “
IN SVC
” (“In Service”) notation will be displayed on
the display for 2 seconds. If you move out of range for more than two minutes,
your radio senses that no signal has been received; a short triple-beep will sound,
and “
OUT SVC
” (“Out of Service”) notation will be displayed on the display for 2
seconds. If you subsequently move back into communication range, as soon as the
other station transmits, a short beep will sound and “
IN SVC
” notation will be dis-
played again on the display for 2 seconds.
DTMF Paging System
This system allows paging and selective calling, using DTMF tone sequences.
When your radio is paged by a station bearing a tone sequence which matches
yours, your radio’s squelch will open and the alert will sound. The three-digit code
of the station which paged you will be displayed on your radio’s display.
Note: In LTR Mode, the ability to transmit the DTMF ANI when releasing the
PTT
switch is disabled.
5-Tone System
This system is designed for 5-Tone SQL Controlling or STUN/KILL/REVIVE
features.
When your radio receive the STUN/KILL code, your radio will get into STUN/
KILL status. When the radio is in the STUN status, the radio is not usable till a ra-
dio receives a REVIVE code. When the radio is in the KILL status, the radio is not
usable, please bring the radio to your Vertex Standard dealer.
To Next Page
Loading...
Need help?
General
