Vertex Standard VX-261 - Operation; Automatic Time-Out Timer

12
VX-261 Operating Manual
oPeration
r
 If the BTLO (BusyTone Lockout) feature has been
programmedonachannel,theradiocantransmitonly
when there is no carrier being received or when the
carrierbeingreceivedincludesthecorrecttone(CTCSS
toneorDCScode).

If the selected channel has been programmed for auto-
matic time-out, you must limit the length of each trans-
mission.Whiletransmitting,abeepwillsound10seconds
before time-out.Another beepwill soundjust before the
deadline; the top panel’s red LED (“
TX
” indicator) will
disappearandtransmissionwillceasesoonthereafter.To
resumetransmitting,youmustreleasethe
PTT
switchand
waitforthe“penaltytimer”toexpire.